We are introducing Model LFS104CW Thermal Imager / Infrared temperature sensor to USB-WiFi output. You can display a thermal image of your target and review every temperature of the 768 (32 x 24 array) pixels. Use Model LFS104CW to display temperature profile in Factory Automation and other industrial applications. It can also be used as a module in your design for small or large system integrations.
Hardware Specification Highlights
- Thermal Image Sensor: 32 x 24 Infrared Array, I2C Interface
- Optical Field of view (FOV): 55 x 35 Degrees
- Infrared Temperature Range: -40 to 300 °C (-40 to 572 °F)
- Infrared Temperature Accuracy: 1.5 °C (3 °F)
- Emissivity: Adjustable from 0.1 to 1.00
- Frame refresh rate: 4 Hz
- WiFi Module is FCC certified
- Dimensions: 2.80 x 0.80 inches (71.1 x 20.3 mm)
- Firmware can be upgraded in the field - Bootloader
- PC Software is included
- Product comes with a USB cable
PC Software Specification Highlights
- Display Thermal Image and all 768 infrared temperatures in real time from USB or WiFi connection
- Read / Configure WiFi module, set WiFi module to serial mode
- Thermal Image Color Palette: Iron or Grayscale
- Software Optical Zoom in and out
- Save Thermal Image and all 768 temperature points on command
- Send email and text message on alarm condition
- Take the Thermal Image picture and email it on alarm condition
- Send real time data to the Cloud for data visualization and analysis
Go to the Product page - LFS104CW
