Thermal Imager / Non-Contact Infrared Temperature Sensor to USB output

We are introducing Model LFS104C Thermal Imager / Infrared temperature sensor to USB output. You can display a thermal image of your target and review every temperature of the 768 (32 x 24 array) pixels. Use Model LFS104C to display temperature profile in Factory Automation and other industrial applications. It can also be used as a module in your design for small or large system integrations.

Hardware Specification Highlights

  • Thermal Image Sensor: 32 x 24 Infrared Array, I2C Interface
  • Optical Field of view (FOV): 55 x 35 Degrees
  • Infrared Temperature Range: -40 to 300 °C (-40 to 572 °F)
  • Infrared Temperature Accuracy: 1.5 °C (3 °F)
  • Emissivity: Adjustable from 0.1 to 1.00
  • Frame refresh rate: 4 Hz
  • Dimensions: 2.80 x 0.80 inches (71.1 x 20.3 mm)
  • Firmware can be upgraded in the field - Bootloader
  • PC Software is included
  • Product comes with a USB cable

PC Software Specification Highlights

  • Display Thermal Image and all 768 infrared temperatures in real time
  • Thermal Image Color Palette: Iron or Grayscale
  • Software Optical Zoom in and out
  • Save Thermal Image and all 768 temperature points on command
  • Send email and text message on alarm condition
  • Take the Thermal Image picture and email it on alarm condition
  • Send real time data to the Cloud for data visualization and analysis

Go to the Product page - LFS104C

Older Post Newer Post