News
T Type Thermocouple Miniature Connector with Noise reduction Filter board
Model LFS110 series introduces T type Thermocouple connector with noise reduction filter board. The filter board is a 2nd order passive Low Pass filter which reduces noise on the thermocouple signal due to RFI/EMI noise. No external power is required to operate the connector or the filter board. The T type connector/filter board is housed in an aluminum enclosure for ruggedness and better noise immunity. The thermocouple input and output connections are Miniature. For best results, it is recommended to use shielded thermocouple wire and connect the thermocouple shield to the aluminum enclosure of the LFS110 device. Go to the...
T, R, S Thermocouple Connector with Noise reduction Filter board
Model LFS110 series introduces T, R, S type Thermocouple connector with noise reduction filter board. The filter board is a 2nd order passive Low Pass filter which reduces noise on the thermocouple signal due to RFI/EMI noise. No external power is required to operate the connector or the filter board. The thermocouple input connection is wired with miniature output connector. For best results, it is recommended to use shielded thermocouple wire and connect the thermocouple shield to the shield connection of the LFS110 device. Go to the Product page - LFS110
Remote (External) and Ambient Temperature sensors to USB output
Model LFS108A is a small board (2.35 x 0.7 inches) that measures remote (external) and ambient temperature with direct USB interface. It connects to a PC USB port, or a computer board like Raspberry Pi. The product comes with a powerful PC application as well as sample Python and (National Instruments) Labview programs. From the PC application you can perform many functions such as: Monitors & Logs ambient temperature and external temperature Sends email and text message on alarm condition Live video of the measurement event via Webcam Takes a picture of the event and emails it on alarm condition Sends...
Bundle of USB sensor boards, Model LFS108F
We are offering 3 USB sensor boards Models LFS108B , LFS108C2 , and LFS108E as a bundle at an attractive price to measure and monitor all your sensing applications. The boards allow you to measure ambient temperature, relative humidity, dew point temperature, non-contact infrared temperature, Frequency, Flow rate, Contact, Event, and Counter. Typical Applications Measure ambient temperature & relative humidity in server rooms, office buildings, clean rooms, Green houses Measure infrared surface temperature of any moving object or any object where contact temperature measurement is not possible Measure Frequency of Paddle wheel sensors and calculate the Flow rate and Totalization...
Wireless Thermal Imager / Non-Contact Infrared Temperature Sensor to USB-WiFi output
We are introducing Model LFS104CW Thermal Imager / Infrared temperature sensor to USB-WiFi output. You can display a thermal image of your target and review every temperature of the 768 (32 x 24 array) pixels. Use Model LFS104CW to display temperature profile in Factory Automation and other industrial applications. It can also be used as a module in your design for small or large system integrations. Hardware Specification Highlights Thermal Image Sensor: 32 x 24 Infrared Array, I2C Interface Optical Field of view (FOV): 55 x 35 Degrees Infrared Temperature Range: -40 to 300 °C (-40 to 572 °F) Infrared Temperature Accuracy: 1.5...